I skipped the ODBC, PhpMyAdmin, Webmin and also omitted most of the MySQL config. This is outside of the scope of this document but I followed this excellent tutorial and had everything configured in no time.

Asterisk - You will need to download and compile Asterisk and get it up and running before anything else.

Nastavenia IP Telefónu Tlačídko SETTINGS 3 – Network Configuration Odomknutie konfigurácie ( **# ) Use DHCP – YES Alternate TFTP – YES TFTP Server – 147.232.22. Komunikačné protokoly IP Telefónov Signalizačné SCCP (Skinny) Cisco proprietary SIP MGCP Dátové RTP Volanie medzi IPT vrámci CCM TCP/2000 SCCP RTP CCM Neznámy telefón Step 6.1 - The phone will not register to Call Manager Step 5 - If no SEP XML file was found then download from the TFTP server the file CallManager operates the TFTP Server file TFTP request for the file Unknown IP address with MAC 32 Step 6.2 - If auto assign is enabled or the phone has been configured then the new IP phone will register to the CallManager and given an extension number (+SEP file is created) or XML Default Nový Firmware Step 3 - If the firmware version currently on the phone is different than the version specified in the file then the firmware is downloaded from the TFTP server TFTP request for firmware if needed Step 4 - IP phone will reboot if the firmware was updated MAC 32 Firmware file 7960 Firmware Stiahnutie konfigurácie Step 1 - Phone applies addressing information obtained through DHCP to the IP stack Step 2 - Using the address of the TFTP server learned from the DHCPOffer the phone looks for and downloads the file named (where AAAABBBBCCCC is the MAC address), if the file is found the phone will register Cisco CM is the TFTP Server file TFTP request for the file MAC 32 If no SEP XML file is found go to Step 5 XML SEP cnf.xml SCCP-dictionary.xml Phonemodel -dictionary.xml Phonemodel -tones.xml Files critical to the IP phone TFTP Server XML SEP

Súbory na TFTP servery Firmware SEP AAAABBBBCCCC. Získanie IP konfigurácie (+TFTP) IP phone send DHCP Discover broadcast requesting an IP address DHCP server selects a free IP address from the pool and sends along with the other scope parameters as a DHCP Offer The IP phone initializes applies the IP configuration to the IP stack The IP phone requests it configuration file from the TFTP server

Process bootovania telefónu The IP phone powers on The phone performs a Power on Self Test (POST) Through CDP the IP phone learns what the auxiliary VLAN is The phone initializes the IP stack The phone boots up Selsius Cisco Call Manager – IP PBX Cisco IP Telefóny Cisco IP Phones Jozef Janitor Ĭisco Svetový leader v oblasti sieťových technológií V roku 1998 odkúpila spol.

Cisco downloading xmldefault cnf xml